Basler A600f Uživatelský manuál Strana 118
- Strana / 180
- Tabulka s obsahem
- KNIHY
Hodnocené. / 5. Na základě hodnocení zákazníků
Configuring the Camera
4-52 BASLER A600
f
DRAFT
Register Name: Strobe 0 Control
Offset from Base Address: 0x200
Field Bit Description
Presence Inq 0 Indicates the presence of the Strobe 0 signal control feature.
0 = not available 1 = available
The Strobe 0 control feature is available on all A600f cameras.
This field is read only.
---
1 ... 5 Reserved
On / Off 6 Sets whether the Strobe 0 signal is on or off.
0 = off 1 = on
Default = 0 on all A600f cameras
If this bit is 0, all other fields in this register are read only.
Signal Polarity
7 Sets the polarity of the Strobe 0 signal.
0 = low active 1 = high active
Default = 1 on all A600f cameras
Delay Value
8 ... 19 Sets the delay value for the Strobe 0 signal (see Section 3.10). The de-
lay value can range from 0 to 4095.
Strobe 0 Delay = (Delay Value Setting) x (1/1024 ms)
Default = 0 on all A600f cameras
Duration Value
20 ... 31 Sets the duration value for the Strobe 0 signal. The duration value can
range from 0 to 4095.
Strobe 0 Duration = (Dur. Value Setting) x (1/1024 ms)
Default = 4095 on all A600f cameras
Register Name: Strobe 1 Control
Offset from Base Address: 0x204
Field Bit Description
Same definitions and values as Strobe 0 Control.
- Basler A600f 1
- Table of Contents 5
- 4 Configuring the Camera 6
- 1 Introduction 9
- Introduction 10
- 1-2 BASLER A600 10
- 1.3 Camera Models 11
- 1.4 Spectral Response 12
- 1.5.3 Ventilation 14
- 1.6 Precautions 15
- 1-8 BASLER A600 16
- 2 Camera Interface 17
- 2.1.2 Pin Assignments 18
- 2.1.3 Connector Types 19
- 2.2 Cables 20
- 2.3 Camera Power 20
- 2.5 Input and Output Ports 21
- Camera Interface 22
- 2-6 BASLER A600 22
- Figure 2-3: I/O Schematic 22
- 2.5.3 Typical Input Circuits 23
- 2.5.4 Typical Output Circuits 24
- 3 Basic Operation and 25
- Standard Features 25
- Figure 3-2: Block Diagram 27
- 3.2 Exposure Control 28
- Why Use the Software Trigger? 32
- Exposure Modes 33
- 3.2.7 Frame Buffering 38
- 3.3 Trigger Ready Signal 40
- 3.4 Integrate Enabled Signal 41
- 3.5 Gain and Brightness 42
- 3.5.1 Setting the Gain 43
- 3.5.2 Setting the Brightness 44
- 3.6 Area of Interest (AOI) 45
- ()45.84 µs+ 48
- 3.7.1 White Balance 50
- 3.7.2 Color Filter ID 51
- 3.9 Mirror Image 54
- Format 7, Mode 0 59
- Format 7, Mode 3 60
- Format 7, Mode 1 63
- 3.14 Error Flags 64
- 4.3 Configuration ROM 68
- 4.4.1 Inquiry Registers 69
- 4-4 BASLER A600 70
- 4-6 BASLER A600 72
- 4-8 BASLER A600 74
- 4-10 BASLER A600 76
- 4-14 BASLER A600 80
- 4-18 BASLER A600 84
- 4-20 BASLER A600 86
- 4-22 BASLER A600 88
- 4-24 BASLER A600 90
- 4-30 BASLER A600 96
- 4-32 BASLER A600 98
- Configuring the Camera 100
- 4-34 BASLER A600 100
- 4-36 BASLER A600 102
- BASLER A600 103
- 4-38 BASLER A600 104
- 4-40 BASLER A600 106
- 4-44 BASLER A600 110
- 4-46 BASLER A600 112
- 4-48 BASLER A600 114
- 4-52 BASLER A600 118
- 5 Image Data Formats and 121
- Structures 121
- 5.2.1 Format 0, Mode 1 122
- 5.2.2 Format 0, Mode 3 122
- 5.2.3 Format 0, Mode 5 122
- 5.3 Image Data Formats 123
- For Filter ID = 0 (RG / GB) 126
- For Filter ID = 1 (GB / RG) 127
- For Filter ID = 2 (GR / BG) 127
- For Filter ID = 3 (BG / GR) 128
- 5.4 Image Data Structure 133
- R, G or B (Raw 16) Component 134
- Features Framework 135
- 0-7 8-15 16-23 24-31 138
- 6.7.1 Extended Data Stream 143
- Smart Features 144
- 6-10 BASLER A600 144
- 6.7.2 Frame Counter 145
- 6.7.3 Cycle Time Stamp 146
- 6.7.4 DCAM Values 147
- DCAM Values Chunk Layout 148
- 6.7.5 CRC Checksum 150
- CRC Checksum Chunk Layout 151
- 6.7.6 Test Images 153
- Test Image Two 154
- Test Image Three 154
- 6.7.8 Lookup Table 157
- 6-30 BASLER A600 164
- 6.7.11 Startup Memory Channel 165
- 6.7.12 Strobe Time Base 166
- 6.8 Customized Smart Features 168
- 7 Mechanical Considerations 169
- 8 Technical Support 173
- Technical Support 176
- 8-4 BASLER A600 176
- Revision History 177
Související produkty a manuály pro Bezpečnostní kamery Basler A600f
Bezpečnostní kamery Basler A600f Uživatelský manuál
(124 stránky)
(124 stránky)
Bezpečnostní kamery Basler A501kc Uživatelský manuál
(150 stránky)
(150 stránky)
Bezpečnostní kamery Basler A501k Uživatelský manuál
(16 stránky)
(16 stránky)
Bezpečnostní kamery Basler A501k Uživatelský manuál
(150 stránky)
(150 stránky)
© 2020, manymanuals.cz. Všechna práva vyhrazena. | 0.071 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentáře k této Příručce